Drying Cabinet With Timer Special Unit For Mines

Unit Specifications

Electrical Rating Volts 240V
Phase / Hz 1 ph / 50 Hz
Amps 13.8 Amps
Electrical Connection IEC Power Cord with 3 Pin Plug 15 Amp (into standard GPO 240 Volt)
Elements Rated 1500 watt x 2
Over temp cut out protection Manual reset thermostat cut-out switch factory set 90°C
Control PCB Microprocessor Control Relay PCB (SKCM325) Access via compatible RS232
Overtemp Protection Electronic cutout @ 5°C above set point
Temperature Control Incremental 1°C – 70°C Factory set at 50°C
Secondary Overtemp Protection Hight Limit 85°C Auto reset thermostat factory set 85 to 90°C
Materials Doors Bi-parting, protruding 330mm out when open.
Door Gasket Silicon Rubber
Cabinet 304/4 stainless steel
Air Circulation Air Vent spigot 98Ø outside Automatic Damper Control, to be vented to outside atmosphere.
Air Filter (mm) 150mm x 150mm x 15mm – washable
Air Bleed Off Automatic Damper Control