Wd Thermal Disinfection Washers

A remarkable advantage of thermal disinfection washers is the ability to repeat medical instrument treatment under the same conditions in terms of performance and safety while, at the same time, preventing the possibility of errors occurring during sterilization cycles. Supreme performance, reliability, cost-effectiveness and full safety are just a few of the features that make thermal disinfection washers manufactured by Smeg Instruments unique.

Why choose thermal disinfection washers?

Why choose thermal disinfection washers?

  • Technology
    Thermal disinfection washers manufactured by Smeg Instruments are equipped with two temperature sensors. Two PT1000 probes, placed on the bottom of the washing well, permit the temperature to be crosschecked. An electronic monitoring system assures that the water temperature never exceeds the maximum allowable values

  • Traceability
    The printer provides a detailed report containing all the information about the completed cycle. Thermal disinfection washers manufactured by Smeg Instruments are also equipped with an RS232 output for connection to a PC to download all the information regarding the washing and thermal disinfection programs performed
  • Compact size
    The compact dimensions of the thermal disinfection washers manufactured by Smeg Instruments allow it to be easily placed in sterilization rooms. Model WD2145 (single phase) is 450 mm wide, model WD1160 (that works in single phase and three phase) is 600 mm wide and model WD4060 (that works in single phase and three phase) is 600mm wide with drying system included
  • Environmental awareness
    The characteristics of the Smeg thermal disinfectors are low consumption and special attention for the reduction of environmental impact. Their use makes it possible moreover not to resort to massive quantities of disinfecting chemical and prevents the users from being exposed to these dangerous substances
  • Precision
    All models come with two high precision peristaltic pumps and efficient level sensors. Employing peristaltic pumps for metering assures, in accordance with current standards, precise measuring of the used
  • Conformity
    The new generation thermal disinfection washers manufactured by Smeg Instruments are class IIB medical devices, constructed in compliance with the technical requirements set forth by standard EN15883
  • Safety
    An electric locking system prevents the door from being accidentally or forced opened while it is automatically released at the end of the cycle, moving it a few centimeters away from the tank body. This solution assures the instrument handled is almost  dried

SERVICE

Smeg Instruments has numerous highly specialized service centers located in Italy and throughout the world. Our customer support number assures prompt and qualified technical support for all your product needs. Replacement parts are dispatched within 24 hours of placing the order

INNOVATION

Smeg Instruments offers avant-garde products carefully overseen in the finest details and developed by a team of engineers with the aid of the latest tools and instruments. International patents guarantee the innovative features that make Smeg Instruments brand exclusive

WARRANTY

Boasting tens of thousands of machines installed worldwide, Smeg Instruments has acquired vast experience in the medical field. For more than 30 years Smeg Instruments has offered the world of dental instrument disinfection a complete range of technologically advanced products that meet and exceed the most recent safety standards

RELIABILITY

Smeg group today has 2000 employees and 18 branches worldwide, the excellence of Made in Italy. Smeg Instruments has successfully become a renown leader in the market of manufacturers of professional equipment with its unique profile thanks to the supreme quality of its products, synonym of innovation, design and technology

SERVICE

Smeg Instruments has numerous highly specialized service centers located in Italy and throughout the world. Our customer support number assures prompt and qualified technical support for all your product needs. Replacement parts are dispatched within 24 hours of placing the order.

INNOVATION

Smeg Instruments offers avant-garde products carefully overseen in the finest details and developed by a team of engineers with the aid of the latest tools and instruments. International patents guarantee the innovative features that make Smeg Instruments brand exclusive.

RELIABILITY

Smeg group today has 2000 employees and 18 branches worldwide, the excellence of Made in Italy. Smeg Instruments has successfully become a renown leader in the market of manufacturers of professional equipment with its unique profile thanks to the supreme quality of its products, synonym of innovation, design and technology.

WARRANTY

Boasting tens of thousands of machines installed worldwide, Smeg Instruments has acquired vast experience in the medical field. For more than 30 years Smeg Instruments has offered the world of dental instrument disinfection a complete range of technologically advanced products that meet and exceed the most recent safety standards.

Steam condenser

The steam condenser is a system that quickly vents the saturated steam created when the washing water is heated up and in particular during the thermal disinfection process. This device prevents condensate from forming near the instrument washers and exhalation of humidity and odors mainly in solutions in which the apparatus is placed under the counter. In addition, in air conditioned rooms, it reduces the air conditioning system’s work load by limiting heat dispersion of the thermal disinfection washers

Peristaltic pumps

The thermal disinfection washers are equipped with 2 peristaltic pumps; one for metering the alkaline detergent during washing while the other is used to meter the acid detergent during the neutralization stage. Each pump comes complete with a level sensor to be placed directly in the canisters for the products used

Electric locking system

The electric locking system prevents the door from being accidentally or forced opened while it is automatically released at the end of the cycle, moving it a few centimeters from the tank body to keep condensate formation on the instruments handled down to minimum

Printer

The importance of tracing the washing and disinfection cycles performed in professional instrument washers is essential for verifying whether the operations executed were successful or not. A printer is a necessary accessory, as it can provide a detailed report containing all the information regarding cycles that have already been executed

EN15883

The thermal disinfection washers meet standard EN15883, that sets forth the technical requirements in terms of product and process quality assurance which professional-grade instrument washers and their accessories must satisfy to assure washing cycles that can be controlled, checked and repeated

Parameter AO

The thermal disinfection washers have a wide range of programs available offering different thermal disinfection solutions and are able to calculate parameter AO in real time. The value obtained is shown directly on the display screen and, if the printer is present, it is stated on the end-of-cycle report

Connection RS232

One of the most important points required by the EN15833 standard is being able to make a complete check of the executed thermal disinfection process using professional instrument washers. Therefore, the new generation of devices must include the equipment necessary for communicating all executed process information. The new generation WD range includes a RS232 output for PC connection. This permits all the executed washing and disinfection program information to be downloaded

Drying System

The forced air “Drying System” consisting of an effective hot air generator and powerful blower fan, provides extremely efficient and quick drying. Air is collected through dual filtering, firstly by a class C pre-filter with 98% efficiency, and then by a class S HEPA absolute filter with 99.999% efficiency. This assures maximum sterility of the blown air on the treated instruments at all times
TECHNICAL FEATURES  
ELECTRONIC CONTROL MICROPROCESSOR
STANDARD PROGRAMS STORED 15
CUSTOMISABLE PROGRAMS 6
DISPLAY WITH SEGMENTS AND COMMUNICATION LED ICONS YES
TANK INTERNAL TEMPERATURE FROM ROOM TEMPERATURE TO 95°C
TEMPERATURE SENSORS IN TANK 2 x PT 1000 CLASS B IEC 60751
DETERGENT DOSING SYSTEM MAX. 3 LIQUID PUMPS
DETERGENT LEVEL SENSOR YES
SAFETY LOCK YES, WITH ELECTROMAGNETIC RELEASE AND
AUTOMATIC OPENING
SAFETY DEVICES SAFETY THERMOSTATS,
DOOR INTERLOCK
TRACEABILITY STORAGE OF DATA FOR 100 MOST RECENTLY
RUN PROGRAMS
RS232 SERIAL PORT FOR PC CONNECTION/PRINTER YES
CYCLE STORAGE YES, WD-TRACE/EXCEL FORMAT
STEEL WASH CHAMBER/ EXTERNAL PANELS AISI 316L/AISI 304
DRYING SYSTEM YES
PREFILTER CLASS C 98%
AND HEPA FILTER CLASS S 99.999%		 YES
WATER SUPPLY COLD AND DEMI WATER INLET
INCORPORATED WATER SOFTNER YES
STEAM CONDENSER YES
WATER HEATING ELECTRICAL 6,3 Kw ON TRI-PHASE,
2,3 Kw ON MONO-PHASE VERSION
EXTERNAL DIMENSIONS
(WITH TOP EMBEDDED)		 600 x 605 x 850 (830) mm
INTERNAL DIMENSIONS 520 x 515 x 545 mm
ELECTRICAL POWER SUPPLY 1/N/PE 230V ~50Hz 3,3 Kw
3/N/PE 400V ~50Hz 7,0 Kw
NOISE MAX 50 dB

To meet these specific requirements of injection washing and disinfection of the instruments, Smeg has designed and produced accessories D-SM12E (WD2145) D-SM8 (WD1160 and WD4060) and D-SM1260EDS for WD4060 only (not in the picture). These accessories enable to wash the outer parts of the instruments, and delicately but thoroughly wash the inside ducts by forcing the washing solution into them.

D-SM12 HAND PIECE WASHING SUPPORT
Healthcare Solutions|BMSS

Hand piece washing support for WD2145. It is supplied with a standard set consisting of 12 silicone rings, 12 filters. Made of stainless steel.

D-SM12E+D-CS1 HAND PIECE ON TROLLEY
Healthcare Solutions|BMSS

Hand piece washing support D-SM12E must be positioned on D-CS1 trolley as shown in the figure at the side.

D-SM8 HAND PIECE WASHING SUPPORT
Healthcare Solutions|BMSS

Hand piece washing support for WD1160 and WD4060. It is supplied with a standard set consisting of 8 silicone rings, 8 filters and 6 nozzles. Made of stainless steel.

D-SM8+CS1-1 HAND PIECE ON TROLLEY
Healthcare Solutions|BMSS

Hand piece washing support D-SM8 must be positioned on CS1-1 trolley as shown in the figure at the side.

Healthcare Solutions|BMSS

CSMICRO1 INSTRUMENT BASKET WITH HANDLES AND COVER

  • Suitable for dental instruments.
  • 2×2 mm mesh.
  • Made of stainless steel.

Healthcare Solutions|BMSS

CSMICRO2 AND CSMICRO3 FINE-DRAWN MESH BASKET WITH COVER

  • Suitable for housing rotary cutters and small instruments.
  • Made of stainless steel.

Healthcare Solutions|BMSS

CSK1/6 BASKET WITH COVER

  • Suitable for various instruments.
  • 5×5 mm cover mesh.
  • 3×3 mm basket mesh.
  • Made of stainless steel.

Healthcare Solutions|BMSS

CSK1/3 INSTRUMENT BASKET WITH HANDLES

  • Suitable for dental instruments.
  • 5×5 mm mesh.
  • Made of stainless steel.

Healthcare Solutions|BMSS

CSK2 INSTRUMENT BASKET WITH HANDLES

  • Suitable for dental instruments.
  • 5×5 mm mesh.
  • Only for the WD1050D model.
  • Made of stainless steel.

Healthcare Solutions|BMSS

D-CM1 BASKET WITH HANDLES

  • Basket with handles, suitable for various instruments.
  • 3×3 mm mesh.
  • Made of stainless steel.

"*" indicates required fields

WD4060 - MORE INFORMATION

Please fill out the form and we will be in touch
Enquire Now