LOWTEM Crystal 50
Specifications:
| Sterilizing Agent | Hydrogen peroxide 40 Cycles/Bottle |
|
| Total Cycle Time | Quick Standard Special | 25+5min 35+5min 45+5min |
| Cycle Temperature | 50+ 5°C | |
| SAL(Sterility Assurance Level) |
10-6 | |
| By-products | Oxygen and vapor water only | |
| Lumenclaims | Rigid lumen & Flexible lumen, Endoscopes | |
| Chamber | Type Material | Rectangular Stainless Steel (SUS) |
| Dimensions | Overall Chamber | 530mm(W) X 780(H) X 855(D) 320mm(W) X 230(H) X 708(D) |
| Volume | Total : 50 Liters | |
| Weight | 150Kg | |
| Control | Microprocessor & Windows CE embedded | |
| Cycle Information | Screen, Printer, USB, 100/10Mbps Ethernet(Option) | |
| PM Cycle | Automatic Alarm & Setup | |
| Electrical | 110V/220V, 50 / 60Hz, 1 Phase, 1800W | |
| Installation Requirements | Front: 100cm Rear, Left side, Right side : 10cm Placement : Built-in wheels provide mobility |
|
| Room Conditions | 5 ~ 40°C, 0 ~ 95%RH(Non-Condensing) | |
| Printer | Built-in Thermal Printer(60Ø Roll Paper) Cycle Parameters(Temp. Pressure, Time, Daily & Total Cycle, etc) Alarm & Error Display |
|
| Others | Emergency Stop(Front), Operator ID Login, Self-Diagnosis, Multi-Language, RFID Coding System | |
| Cart(option) | 530mm(W) X 720(H) X 8001L) / 50kg | |
LOWTEM Crystal 50
Specifications:
| Sterilizing Agent | Hydrogen peroxide 40 Cycles/Bottle |
|
| Total Cycle Time | Quick Standard Special | 25+5min 35+5min 45+5min |
| Cycle Temperature | 50+ 5°C | |
| SAL(Sterility Assurance Level) |
10-6 | |
| By-products | Oxygen and vapor water only | |
| Lumenclaims | Rigid lumen & Flexible lumen, Endoscopes | |
| Chamber | Type Material | Rectangular Stainless Steel (SUS) |
| Dimensions | Overall Chamber | 530mm(W) X 780(H) X 855(D) 320mm(W) X 230(H) X 708(D) |
| Volume | Total : 50 Liters | |
| Weight | 150Kg | |
| Control | Microprocessor & Windows CE embedded | |
| Cycle Information | Screen, Printer, USB, 100/10Mbps Ethernet(Option) | |
| PM Cycle | Automatic Alarm & Setup | |
| Electrical | 110V/220V, 50 / 60Hz, 1 Phase, 1800W | |
| Installation Requirements | Front: 100cm Rear, Left side, Right side : 10cm Placement : Built-in wheels provide mobility |
|
| Room Conditions | 5 ~ 40°C, 0 ~ 95%RH(Non-Condensing) | |
| Printer | Built-in Thermal Printer(60Ø Roll Paper) Cycle Parameters(Temp. Pressure, Time, Daily & Total Cycle, etc) Alarm & Error Display |
|
| Others | Emergency Stop(Front), Operator ID Login, Self-Diagnosis, Multi-Language, RFID Coding System | |
| Cart(option) | 530mm(W) X 720(H) X 8001L) / 50kg | |