Malmet Blanket and fluid warming cabinets
Blanket Warming Cabinet
Reduce the risk of hypothermic reaction, post-operative discomfort and stress in patients. Blankets are gently heated to restore body temperature post surgery, and assist thermo-regulation. Blanket warming cabinets are recommended for Recovery, Maternity, General Ward, Specialist and Intensive Care Units.
Dimensions: | 908mm H x 850mm W x 577mm D |
Voltage: | 240V, 2.8 Amps |
Phase: | Single |
Hertz: | 50 |
Capacity | Up to 12 Blankets |
Set Temperature | 60oC |
Max temp setting: | 60oC |
Power consumption: | 7.8kW 24 hr |
Cabinet Stand: | 615mm H x 850mm W x 526mm D |
Floor bench skirt | 80mm H x 850mm W x 526mm D |
Fluid Warming Cabinet
The only safe and accurate method of determining and maintaining saline, irrigation, glycene, parenteral and IPD fluid temperature to the manufacturer’s recommendations. Fluid warming cabinets are essential in Maternity, Recovery, Theatre, Specialist and Intensive Care units.
Dimensions: | 908mm H x 850mm W x 577mm D |
Voltage: | 240V, 2.8 Amps |
Phase: | Single |
Hertz: | 50 |
Capacity | 60 Litre |
Set Temperature | 37oC |
Max temp setting: | 50oC |
Power consumption: | 7.8kW 24 hr |
Cabinet Stand: | 615mm H x 850mm W x 526mm D |
Floor bench skirt | 80mm H x 850mm W x 526mm D |
Combination Fluid and/or Blanket Warming Cabinets
- Stainless steel construction with insulation cavity, therefore the exterior is cool to touch
- Double glazed doors for inventory monitoring
- Magnetic door closure
- Adjustable shelving: 1 litre and 2 litre bottles and bags can be stored
- Special sensor plate for actual fluid temperature monitoring
- Capacity for up to 24 blankets or 120 litres of fluid
- Over temperature protection (5°C above setting) and temperature lock-out
- Fan-assisted convection heating
- Single cabinets can be converted to combination units. Mix and match to suit any requirements
- Multi-purpose installation: Wall mounted, freestanding or bench
- Castors (2 fixed, 2 swivel and lockable) optional
- Adjustable shelving:
Fluid: 4 wire shelves, bottom fixed
Blanket: 3 wire shelves
Models Available:
Blanket Models
Product Code | Model No | Description |
---|---|---|
8-A00-83-100 | BWM | Blanket Warming Cabinet – Wall Mounted |
8-A00-83-102 | BWS | Blanket Warming Cabinet – With Stand |
8-A00-83-104 | BWFB | Blanket Warming Cabinet – With Floor/Bench Skirt |
8-A00-83-106 | BWFC | Blanket Warming Cabinet – Freestanding with Castors |
Fluid Models
Product Code | Model No | Description |
---|---|---|
8-A00-84-100 | FWM | Fluid Warming Cabinet – Wall Mounted |
8-A00-84-102 | FWS | Fluid Warming Cabinet – With Stand |
8-A00-84-104 | FWFB | Fluid Warming Cabinet – With Floor/Bench Skirt |
8-A00-84-106 | FWFC | Fluid Warming Cabinet – Freestanding with Castors |
Storage Models
Product Code | Model No | Description |
---|---|---|
8-A00-89-100 | SCM | Storage Cabinet – Wall Mounted |
8-A00-89-102 | SCS | Storage Cabinet – With Stand |
8-A00-89-104 | SCFB | Storage Cabinet – With Floor/Bench Skirt |
Combination Warming Cabinets
Product Code | Model No | Description |
---|---|---|
8-A00-86-101 | BBWF | Blanket / Blanket Warming Cabinet – Freestanding |
8-A00-86-103 | FFWF | Fluid / Fluid Warming Cabinet – Freestanding |
8-A00-86-105 | FBWF | Fluid / Blanket Warming Cabinet – Freestanding |
8-A00-86-107 | BSWF | Blanket / Storage Warming Cabinet – Freestanding |
8-A00-86-109 | FSWF | Fluid / Storage Warming Cabinet – Freestanding |
8-A00-86-111 | SSCF | Storage / Storage Cabinet – Freestanding |
Combination Warming Cabinets with Castors
Product Code | Model No | Description |
---|---|---|
8-A00-86-113 | BBWFC | Blanket / Blanket Warming Cabinet – Freestanding with Castors |
8-A00-86-114 | FFWFC | Fluid / Fluid Warming Cabinet – Freestanding with Castors |
8-A00-86-115 | FBWFC | Fluid / Blanket Warming Cabinet – Freestanding with Castors |
8-A00-86-116 | BSWFC | Blanket / Storage Warming Cabinet – Freestanding with Castors |
8-A00-86-117 | FSWFC | Fluid/Storage Warming Cabinet – Freestanding with Castors |
Malmet Blanket and fluid warming cabinets
Blanket Warming Cabinet
Reduce the risk of hypothermic reaction, post-operative discomfort and stress in patients. Blankets are gently heated to restore body temperature post surgery, and assist thermo-regulation. Blanket warming cabinets are recommended for Recovery, Maternity, General Ward, Specialist and Intensive Care Units.
Dimensions: | 908mm H x 850mm W x 577mm D |
Voltage: | 240V, 2.8 Amps |
Phase: | Single |
Hertz: | 50 |
Capacity | Up to 12 Blankets |
Set Temperature | 60oC |
Max temp setting: | 60oC |
Power consumption: | 7.8kW 24 hr |
Cabinet Stand: | 615mm H x 850mm W x 526mm D |
Floor bench skirt | 80mm H x 850mm W x 526mm D |
Fluid Warming Cabinet
The only safe and accurate method of determining and maintaining saline, irrigation, glycene, parenteral and IPD fluid temperature to the manufacturer’s recommendations. Fluid warming cabinets are essential in Maternity, Recovery, Theatre, Specialist and Intensive Care units.
Dimensions: | 908mm H x 850mm W x 577mm D |
Voltage: | 240V, 2.8 Amps |
Phase: | Single |
Hertz: | 50 |
Capacity | 60 Litre |
Set Temperature | 37oC |
Max temp setting: | 50oC |
Power consumption: | 7.8kW 24 hr |
Cabinet Stand: | 615mm H x 850mm W x 526mm D |
Floor bench skirt | 80mm H x 850mm W x 526mm D |
Combination Fluid and/or Blanket Warming Cabinets
- Stainless steel construction with insulation cavity, therefore the exterior is cool to touch
- Double glazed doors for inventory monitoring
- Magnetic door closure
- Adjustable shelving: 1 litre and 2 litre bottles and bags can be stored
- Special sensor plate for actual fluid temperature monitoring
- Capacity for up to 24 blankets or 120 litres of fluid
- Over temperature protection (5°C above setting) and temperature lock-out
- Fan-assisted convection heating
- Single cabinets can be converted to combination units. Mix and match to suit any requirements
- Multi-purpose installation: Wall mounted, freestanding or bench
- Castors (2 fixed, 2 swivel and lockable) optional
- Adjustable shelving:
Fluid: 4 wire shelves, bottom fixed
Blanket: 3 wire shelves
Models Available:
Blanket Models
Product Code | Model No | Description |
---|---|---|
8-A00-83-100 | BWM | Blanket Warming Cabinet – Wall Mounted |
8-A00-83-102 | BWS | Blanket Warming Cabinet – With Stand |
8-A00-83-104 | BWFB | Blanket Warming Cabinet – With Floor/Bench Skirt |
8-A00-83-106 | BWFC | Blanket Warming Cabinet – Freestanding with Castors |
Fluid Models
Product Code | Model No | Description |
---|---|---|
8-A00-84-100 | FWM | Fluid Warming Cabinet – Wall Mounted |
8-A00-84-102 | FWS | Fluid Warming Cabinet – With Stand |
8-A00-84-104 | FWFB | Fluid Warming Cabinet – With Floor/Bench Skirt |
8-A00-84-106 | FWFC | Fluid Warming Cabinet – Freestanding with Castors |
Storage Models
Product Code | Model No | Description |
---|---|---|
8-A00-89-100 | SCM | Storage Cabinet – Wall Mounted |
8-A00-89-102 | SCS | Storage Cabinet – With Stand |
8-A00-89-104 | SCFB | Storage Cabinet – With Floor/Bench Skirt |
Combination Warming Cabinets
Product Code | Model No | Description |
---|---|---|
8-A00-86-101 | BBWF | Blanket / Blanket Warming Cabinet – Freestanding |
8-A00-86-103 | FFWF | Fluid / Fluid Warming Cabinet – Freestanding |
8-A00-86-105 | FBWF | Fluid / Blanket Warming Cabinet – Freestanding |
8-A00-86-107 | BSWF | Blanket / Storage Warming Cabinet – Freestanding |
8-A00-86-109 | FSWF | Fluid / Storage Warming Cabinet – Freestanding |
8-A00-86-111 | SSCF | Storage / Storage Cabinet – Freestanding |
Combination Warming Cabinets with Castors
Product Code | Model No | Description |
---|---|---|
8-A00-86-113 | BBWFC | Blanket / Blanket Warming Cabinet – Freestanding with Castors |
8-A00-86-114 | FFWFC | Fluid / Fluid Warming Cabinet – Freestanding with Castors |
8-A00-86-115 | FBWFC | Fluid / Blanket Warming Cabinet – Freestanding with Castors |
8-A00-86-116 | BSWFC | Blanket / Storage Warming Cabinet – Freestanding with Castors |
8-A00-86-117 | FSWFC | Fluid/Storage Warming Cabinet – Freestanding with Castors |
Instrument & Anaesthetic Apparatus Drying Cabinet
Handles large loads with any combination of instruments, tubes, masks and parts
- Designed to dry surgical instrument, respiratory tubing and face masks
- Connects to standard hospital power outlets
- Compact design
- Double wall stainless steel construction
- Double glazed doors
- Dual over temperature cut-out and cabinet pre-set temperature of 70°C
- Compliance to AS 2514, AS2774
- Available also as “Pass Through” Cabinets
Front load dimensions: | 1,750mm H x 750mm W x 640mm D |
Pass through dimensions: | 1,750mm H x 750mm W x 690mm D |
Power: | 240V 15A |
Shipping Weight: | 185 kg |
Accessories: | Anaesthetic Bag Holder Tube Holder Rack Full Width Wire Shelf Part Width Wire Shelf |
Models Available:
Front Loading Drying Cabinet
Product Code | Model No | Description |
---|---|---|
8-A00-87-030 | DC11 | MIXED 6 Shelves, 2 Instrument Trays, 2 x 18 Hole Tube Holders, 3 Air Diffusers, 3 Air Diffuser Blanks |
8-A00-87-035 | DC11T | MIXED WITH TIMER 6 Shelves, 2 Instrument Trays, 2 x 18 Hole Tube Holders, 3 Air Diffusers, 3 Air Diffuser Blanks |
8-A00-87-040 | DC12 | SHELVES 6 Shelves, 2 Instrument Trays |
8-A00-87-045 | DC12T | SHELVES WITH TIMER 6 Shelves, 2 Instrument Trays |
8-A00-87-051 | DC13 | HANGING 5 x 18 Hole Tube Holders, 3 Air Diffuser Blanks |
8-A00-87-055 | DC13T | HANGING WITH TIMER 5 x 18 Hole Tube Holders, 3 Air Diffuser Blanks |
Pass Through Drying Cabinet
Product Code | Model No | Description |
---|---|---|
8-A00-87-060 | DC21 | MIXED 6 Shelves, 2 Instrument Trays, 2 x 18 Hole Tube Holders, 3 Air Diffusers, 3 Air Diffuser Blanks |
8-A00-87-065 | DC21T | MIXED WITH TIMER 6 Shelves, 2 Instrument Trays, 2 x 18 Hole Tube Holders, 3 Air Diffusers, 3 Air Diffuser Blanks |
8-A00-87-070 | DC22 | SHELVES 6 Shelves, 2 Instrument Trays |
8-A00-87-075 | DC22T | SHELVES WITH TIMER 6 Shelves, 2 Instrument Trays |
8-A00-87-081 | DC23 | HANGING 5 x 18 Hole Tube Holders, 3 Air Diffuser Blanks |
8-A00-87-085 | DC23T | HANGING WITH TIMER 5 x 18 Hole Tube Holders, 3 Air Diffuser Blanks |
Instrument & Anaesthetic Apparatus Drying Cabinet
Handles large loads with any combination of instruments, tubes, masks and parts
- Designed to dry surgical instrument, respiratory tubing and face masks
- Connects to standard hospital power outlets
- Compact design
- Double wall stainless steel construction
- Double glazed doors
- Dual over temperature cut-out and cabinet pre-set temperature of 70°C
- Compliance to AS 2514, AS2774
- Available also as “Pass Through” Cabinets
Front load dimensions: | 1,750mm H x 750mm W x 640mm D |
Pass through dimensions: | 1,750mm H x 750mm W x 690mm D |
Power: | 240V 15A |
Shipping Weight: | 185 kg |
Accessories: | Anaesthetic Bag Holder Tube Holder Rack Full Width Wire Shelf Part Width Wire Shelf |
Models Available:
Front Loading Drying Cabinet
Product Code | Model No | Description |
---|---|---|
8-A00-87-030 | DC11 | MIXED 6 Shelves, 2 Instrument Trays, 2 x 18 Hole Tube Holders, 3 Air Diffusers, 3 Air Diffuser Blanks |
8-A00-87-035 | DC11T | MIXED WITH TIMER 6 Shelves, 2 Instrument Trays, 2 x 18 Hole Tube Holders, 3 Air Diffusers, 3 Air Diffuser Blanks |
8-A00-87-040 | DC12 | SHELVES 6 Shelves, 2 Instrument Trays |
8-A00-87-045 | DC12T | SHELVES WITH TIMER 6 Shelves, 2 Instrument Trays |
8-A00-87-051 | DC13 | HANGING 5 x 18 Hole Tube Holders, 3 Air Diffuser Blanks |
8-A00-87-055 | DC13T | HANGING WITH TIMER 5 x 18 Hole Tube Holders, 3 Air Diffuser Blanks |
Pass Through Drying Cabinet
Product Code | Model No | Description |
---|---|---|
8-A00-87-060 | DC21 | MIXED 6 Shelves, 2 Instrument Trays, 2 x 18 Hole Tube Holders, 3 Air Diffusers, 3 Air Diffuser Blanks |
8-A00-87-065 | DC21T | MIXED WITH TIMER 6 Shelves, 2 Instrument Trays, 2 x 18 Hole Tube Holders, 3 Air Diffusers, 3 Air Diffuser Blanks |
8-A00-87-070 | DC22 | SHELVES 6 Shelves, 2 Instrument Trays |
8-A00-87-075 | DC22T | SHELVES WITH TIMER 6 Shelves, 2 Instrument Trays |
8-A00-87-081 | DC23 | HANGING 5 x 18 Hole Tube Holders, 3 Air Diffuser Blanks |
8-A00-87-085 | DC23T | HANGING WITH TIMER 5 x 18 Hole Tube Holders, 3 Air Diffuser Blanks |
Tall Warming Cabinet
New to the range of products is the Tall Warming Cabinet, this offers a cost effective option for customers requiring extra capacity for the blanket or fluid warming cabinets.
- Holds up to 30 blankets
- Holds up to 91 litres of fluid
- Adjustable shelving
- Freestanding or castors optional
105L – Blanket and/or Fluid Warmer
Designed for:
- Facilities with limited space
- Day surgeries
- GP Clinics
- Aged Care
- Laboratories
- Facilities with low demand
- Flexible solution
Malmet has added a benchtop warming cabinet to the existing warming cabinet family of products. As with all Malmet products the 105 Litre warming cabinet comes with a 2 year parts and labour warranty
For further information contact your local Business Development Manager or Customer Service.
Technical Specifications
Malmet is a privately owned and operated Australian family business belonging to the Celi Group of Companies.
Malmet has been manufacturing hospital and aged care equipment since 1969, and supplies hospitals and nursing homes throughout Australia and overseas through a comprehensive network of distributors and agents.
All Malmet products are manufactured in Leeton, NSW. The Leeton site is ISO 9001:2015 and ISO 13485:2016 certified.
105L – Blanket and/or Fluid Warmer
Designed for:
- Facilities with limited space
- Day surgeries
- GP Clinics
- Aged Care
- Laboratories
- Facilities with low demand
- Flexible solution
Malmet has added a benchtop warming cabinet to the existing warming cabinet family of products. As with all Malmet products the 105 Litre warming cabinet comes with a 2 year parts and labour warranty
For further information contact your local Business Development Manager or Customer Service.
Technical Specifications
Malmet is a privately owned and operated Australian family business belonging to the Celi Group of Companies.
Malmet has been manufacturing hospital and aged care equipment since 1969, and supplies hospitals and nursing homes throughout Australia and overseas through a comprehensive network of distributors and agents.
All Malmet products are manufactured in Leeton, NSW. The Leeton site is ISO 9001:2015 and ISO 13485:2016 certified.