A range of drying cabinets for instruments including surgical equipment, ancillary equipment, respiratory tubing and face masks.

A range of drying cabinets for instruments including surgical equipment, ancillary equipment, respiratory tubing and face masks.

  • Designed to dry surgical instruments, respiratory tubing, face masks
  • Handles large loads with any combination of tubes, masks and parts
  • Connects to standard hospital power outlets

  • Compact design

  • Double wall stainless steel construction
  • Double glazed doors
  • Dual over temperature cut-out and cabinet pre-set temperature of 70ºC
  • Available also as “Pass Through” Cabinets
Healthcare Solutions - Babich Maintenance & Steriliser Services

Available Combinations: with or without timer

Available Combinations: with or without timer

  • Front load (6 half width wire shelves; 2 racks of 18 x 37mm dia tube holders)
  • Front load (6 full width wire shelves; no tube holders)
  • Front load (full hanging; 5 racks of 18 x 37mm dia tube holders)
  • Front load & rear unload (6 half width wire shelves; 2 racks of 18 x 37mm dia tube holders)
  • Front load & rear unload (6 full width wire shelves; no tube holders)
  • Front load & rear unload (full hanging; 5 racks of 18 x 37mm dia tube holders)

Drying Cabinet Accessories

Drying Cabinet Accessories

  • Anaesthetic bag holder (Product Code 87-5038)
  • 18 x 37mm dia tube holder rack (Product Code 87-5104)
  • Door lock bolt assembly; fitted in factory (Product Code 100-5506)

Accessories:

  • Anaesthetic Bag Holder
  • Tube Holder Rack
  • Full Width Wire Shelf,
  • Part Width Wire Shelf

Instrument & Anaesthetic Apparatus Drying Cabinet

Instrument & Anaesthetic Apparatus Drying Cabinet

  • Handles large loads with any combination of instruments, tubes, masks and parts
  • Connects to standard hospital power outlets
  • Double wall stainless steel construction
  • Dual over temperature cut-out and cabinet pre-set temperature of 70°C
  • Available also as “Pass Through” Cabinets
  • Designed to dry surgical instrument, respiratory tubing and face masks
  • Compact design
  • Double glazed doors

  • Compliance to AS 2514, AS2774

Front load dimensions: 1,750mm H x 750mm W x 640mm D
Pass through dimensions: 1,750mm H x 750mm W x 690mm D
Power: 240V 15A
Shipping Weight: 185 kg
Accessories: Anaesthetic Bag Holder
Tube Holder Rack
Full Width Wire Shelf
Part Width Wire Shelf

Unit Specifications

Unit Specifications

Electrical Rating Volts 240V
Phase / Hz 1 ph / 50 Hz
Amps 13.8 Amps
Electrical Connection IEC Power Cord with 3 Pin Plug 15 Amp (into standard GPO 240 Volt)
Elements Rated 1500 watt x 2
Over temp cut out protection Manual reset thermostat cut-out switch factory set 90°C
Control PCB Microprocessor Control Relay PCB (SKCM325) Access via compatible RS232
Overtemp Protection Electronic cutout @ 5°C above set point
Temperature Control Incremental 1°C – 70°C Factory set at 50°C
Secondary Overtemp Protection Hight Limit 85°C Auto reset thermostat factory set 85 to 90°C
Materials Doors Bi-parting, protruding 330mm out when open.
Door Gasket Silicon Rubber
Cabinet 304/4 stainless steel
Air Circulation Air Vent spigot 98Ø outside Automatic Damper Control, to be vented to outside atmosphere.
Air Filter (mm) 150mm x 150mm x 15mm – washable
Air Bleed Off Automatic Damper Control

"*" indicates required fields

Malmet Drying Cabinet - MORE INFORMATION

Fill out the form to receive a brochure
Enquire Now